L2101 &L2102 Integrated Receiver Decoder Instruction Manual – Issue 1 – September 2003
Page
45 of 126
Link Research Ltd. 23 Watford Metro Centre, Dwight Road, Watford, Hertfordshire, WD18 9XA, England.
Tel: +44 (0) 1923 200 900 Customer Support and S44 (0) 1923 200 909
Registered in London No. 2074604 Web: www.linkres.co.uk
Fax: +44 (0) 1923 241 357
IRD Front Panel Main Menu Options.
MENU
DESCRIPTION
Configuration
Menu
The
Configuration Menu
option enables access to the Receiver,
Decoder and System configuration parameters. These options are used to
define or modify the IRD configuration:
•
The
Receiver Configuration Menu
provides functions to configure
the operation of the receiver, depending on the type of receiver
installed in the IRD;
QPSK
(DVB-S),
DSNG
(DVB-DSNG),
QAM
(DVB-C)
•
The
Decoder Configuration Menu
provides access to a further
sub-menu for
Stream
,
CI
,
Video
and
Audio
settings.
•
The
System Configuration Menu
enables setup and control on the
IRD operation.
Status Menu
The
Status Menu
option enables access to the Receiver, Decoder and
System status parameters. These options are used to view the IRDs
current configuration and status:
•
Depending on the type of Receiver installed in the IRD, the
Receiver
Status Menu
provides functions to monitor the operation of the
receiver.
•
The
Decoder Status Menu
provides access to a further sub-menu
for monitoring Stream, CI, Video and Audio operation.
•
The
System Status Menu
enables viewing the IRD information.
Test Menu
The
Test Menu
option enables access to special internal test procedures
on the Decoder section of the IRD.
Run Menu
The
Run Menu
option enables access to high-level operation menus,
depending on the operation mode of the IRD – PID or Service Mode:
•
When in Service Mode, the Run Menu provides sub-menus for
advanced control and operation functions, divided into Service, Mode
and Advance Sub-Menus.
•
When in PID Mode, the Run Menu provides sub-menus for advanced
control and operation functions, divided into PID, Mode and Advance
Sub-Menus.
