Wireless N300 Home Router
47
3.
Policy Name:
Briefly describe the current rule, say,
Permit only
, (It can only
consist of numbers, letters, or underscore).
4.
MAC Address:
Enter 00:E4:A5:44:35:69.
5.
Time:
Select 0 for all fields to apply the rule 24hrs/day.
6.
Day(s):
Select Monday to Friday.
7.
Enable:
Check the
Enable
box.
8.
OK:
Click to save your settings.
7.3 Client Filter
This section allows you to set the times specific clients can or cannot access the
Internet via the devices’ assigned IP addresses and service port.
Forbid Only (
or
Deny/Forbid)
: Only PCs listed as Forbidden (or Denied) will be
forbidden from accessing specified services; others are not restricted;
Permit Only (
or
Permit/Allow)
: Only PCs listed as permitted (or allowed) will be
permitted to access specified services; others will be forbidden.
1.
Filter Mode
: Select Permit Only.
2.
Access Policy
: Select an access policy number, say, 1, from the drop-down list.
3.
Policy Name
: Briefly describe the current rule, say, 80.
4.
Start IP/End IP
: Enter the same IP address, say, 110, or 2 different IP addresses,
say, 110 and 120 in both boxes to specify a single PC or a range of PCs for the
current rule to apply to.
5.
Port
: Specify TCP/UDP protocol port number (s), say, 80.
6.
Type (
or
Protocol)
: Select Both.
7.
Time
: Specify a time period for a current rule to take effect. If the field is set to
0:00-0:00, the rule will be applied 24hrs/day.
8.
Day(s)
: Specify a day or several days for a current rule to take effect.
9.
Enable
: Check/uncheck to enable/disable the feature.
10.
OK
: Click to activate your settings.
Summary of Contents for L1-RW333
Page 1: ...Wireless N300 Home Router...
Page 70: ...Wireless N300 Home Router 66...
