Panel Descriptions
1
OUT1--8: HDMI output .
2
IR : IR receive.
3
IN1--8: HDMI input .
4
ALL: HDMI output 1--8
5
LOCK: Press this button to lock all the functions and press it again to release the lock.
1
RS232 port.
2
LAN port.
3
HDMI output port.
4
HDMI input port (HDMI or DVI).
5
Power: Press this button to turn the system on.
6
IR extender: This slot is where you can extend your IR receiver with an IR extender cable that supports only
38KHz.
7
Power input: Plug the 12V DC power supply into the unit and connect the adaptor to an AC wall outlet.
Connections and Operations
1) Connect the HDMI input source (
such as HD-DVD/ PS3/STB etc.)Into MX88.
2)
Connect HDMI OUT of
MX88 to display equipment.
3) Connect the
Broadband
IR receiv
e
cable into
MX88
IR RX
ports
.
4) Power on the input source you want to show. (
Keep the unused input power off,
otherwise it may interfere the normal display).
5)
Plug the power cable into MX88.
6)
Turn on the power, when the LED panel stops flashing circularly, the initialization of the
matrix are ready.
7)
T
urn on the display
s
you want to watch.
8)
Us
e the remote to control the matrix
,
or using Front Panel, RS232 and
LAN port to control.
2. Control via
IR remote.
IR remote.
IR remote.
User can control the HDMI route of the matrix by using the IR remote.
T
here are two group key pads
for sixteen ports.
P
ress the output source selection button in order to choose which input port
corresponds to the desired output port. (For example: Output 8 select Input 7, first press output
8, then press input 7, LCD display 8-7)
NOTE:
if the IR remote isn’t work, please press the” system code switch key”, but please do not put the
remote against the LM-HD808-4K
3. Control via RS232.
