GB
1 Contents
1
Contents
2
2
Key to symbols
2
3
General safety instructions
2
4
Overview of products
3
5
Initial Operation - General instructions
5
6
Initial Operation
5
7
Protection against uncontrolled movements
6
8
Overload protection
7
9 Error messages and rectification
7
10 Technical data
7
2 Key to symbols
Danger of personal injury!
The safety instructions must be observed!
Warning! Danger to property!
The safety instructions must be observed!
Information
Special information OR
Reference to other sources of information
3 General safety instructions
Guarantee
The function and safety of the equipment is only guaranteed if the warning and safety instructions
included in these operating instructions are adhered to.
MFZ Antriebe GmbH & Co. KG is not liable for any personal injury or damage to property that occurs as a
result of the warning and safety instructions being disregarded.
Using the equipment for its intended purpose
The RS200L controls are designed only for dock levellers with hinged lip.
Target group
Only qualified and trained electricians may connect, program and service the controls.
Qualified and trained electricians meet the following requirements:
knowledge of the general and specific safety and accident prevention regulations,
knowledge of the relevant electrical regulations,
trained in the use and care of appropriate safety equipment,
capable of recognising the dangers associated with electricity.
Instructions for installation and connection
The controls must be disconnected from the electricity supply before carrying out electrical works. It
must be ensured that the electricity supply remains disconnected during the works.
Local protective regulations must be complied with.
Page 2 / 8
–
RS 200L / LC-3157 Rev.A
