Link Communications RLC-CLUB, User Manual

Page: 66 / 329

4-10
Version 1.73 Copyright © 1997 Link Communications Inc. 1/18/97
DTMF Interdigit Timers or Auto-execution timers (See Command 078):
These timers are used to get rid of stray DTMF digits after several second without entering any
more digits. For example, if you key and press a DTMF digit, then start talking, this timer will
throw that digit away after a default of 5 seconds. That way if, after you talk a while, you try to
enter a command, the digit you entered 30 seconds ago won't mess it up. Of course if you
unkeyed during that time, all of the digits would be either executed or discarded anyway. This
also reduces problems caused by voice falsing the DTMF decoder, by discarding the incorrectly
received digits if no more digits are received during the length of this timer. This timer starts
running when the DTMF digit is released, so you can hold a DTMF digit as long as you like
without it being discarded.
Timer Number Description Defaults
051 DTMF Interdigit Timer, Receiver 1 5 sec. (005)
052 DTMF Interdigit Timer, Receiver 2 "
053 DTMF Interdigit Timer, Autopatch "
Reverse Patch Ring Timer:
This timer sets the maximum time between rings allowed for the reverse patch to work. If this
timer expires between rings, the ring count starts over. This would keep the reverse patch from
ever answering the phone.
- This timer is programmed in 1 second increments from 001-9999
Timer Number Description Defaults
054 Reverse Patch Ring Timer 10 sec. (010)
DVR Start Recording Timer:
This timer sets the maximum time allowed after entering a command to start recording a DVR
message and when you actually key up to start the recording. If you wait longer than this timer,
it will not record. This is so a command to record a DVR message can not be executed and end
up recording someone that keys up an hour later. If you start the recording with a DTMF digit,
this timer will not have any effect.
- This timer is programmed in 1 second increments from 001-9999
Timer Number Description Defaults
055 DVR Start Recording Timer 10 Sec. (010)