Link Communications RLC-CLUB, User Manual, Page: 171 / 329

12-7
Version 1.73 Copyright © 1997 Link Communications Inc. 1/18/97
095: Recall Whether Output Line is On or Off
This command allows you to read the output lines on the deluxe interface. This command will
tell you whether the output line is turned on or off. The outputs are only supported on the RLC-
Club Deluxe interface.
<095> l Check a single output line
<095> l..l Check multiple output lines
Parameters:
- 095 is the default command name.
- L is the output line number (1..8)
Notes:
To provide a customized message when an output line is turned on or off, call
Commands 093 or 094 from a macro that also speaks a voice message. There is no easy way to
get a customized message to recall whether a line is on or off at the current time without
turning it on or off again. If you really need custom recall messages and you are very familiar
with macro programming, read the following, otherwise don't bother. The idea is to use a
macro to call the output line on and off commands. Also in that on/off macro, call the program-
single-command-macro command and program another macro (we will call it the recall macro)
to speak the appropriate recall message. That recall macro could then be executed to find out
whether the output line was turned on or off last. In other words, we would use the on and off
macros to program the recall macro. Whichever on/off macro was executed last would have
programmed the recall macro last, making it contain the appropriate message. If you didn't
understand all of this, don't worry about it, use this command, and wait for a later software
version that will make all of this easier.