Linhai LH50DU, Owner'S/Operator'S Manual

Page: 93 / 109

LH50DU
OWNER’S/OPERATOR’S MANUAL
1.0
12. MAINTENANCE
12- 11
3. Remove fill plug and add 825
±
25ml of SAE GL-4 85W/90 Weight
Gear Lubricant and inspect oil level. Oil level should be kept even
with the center of the drill point (approximately below the top of the fill
hole).
4. Reinstall the fill plug. Torque Fill plug to 16~22 ft. lbs. (22~30N.m)
5. Check for leaks.
WHEEL NUT TORQUE SPECIFICATIONS
Bolt Size Specification
Front M12X1.25 69Ft.Lbs 95N.m
Rear M12X1.25 69Ft.Lbs 95N.m
NOTE: All nuts that have a cotter pin installed must be serviced by
an authorized Dealer.
Front Wheel Hub Tightening
Front wheel bearing tightness and spindle nut retention are critical
component operations. Service work must be performed by an
authorized dealer.
Front Rear
Tapered nuts: install with
tapered side against wheel
AXLE BOOTS