Linhai Crossfire E5 2022, Service Manual

Page: 40 / 99

CHAPTER 4 FINAL DRIVE
LH50DU SERVICE MANUAL 19.1
CHAPTER 4 FINAL DRIVE. 4- 2
4.1 WH E E L , H U B , AND SPINDLE TORQUE TABLE
Item Specification
Front W
heel Nuts 69 Ft.Lbs 95 Nm
Rear W
heel Nuts 69 Ft.Lbs 95 Nm
Front Hub Nut on Spindle/ outer CV joint 101 Ft.Lbs 137 Nm
Rear Hub Retaining Nut 101 Ft.Lbs 137 Nm
Refer to exploded views and text for torque values of other fasteners.
CAUTION: Locking nuts, and bolts with pre-applied locking agent should be replaced if
removed. The self- locking properties of the nut or bolt are
reduced or destroyed during rem
oval.
4.2 FRONT HUB EXPLODED VIEW
4.3 FRONT HUB REMOVAL/INSPECTION
1. Elevate front end and safely support machine
under footrest/frame area.
CAUTION: Serious injury may result if machine tips
or falls. Be sure machine is secure before beginning
this service procedure. Wear eye protection when
removing bearings and seals.
2. Check bearings for side play by grasping the