F
:
END USER INSTRUCTIONS
GATE OPENER OPERATION & SAFETY GUIDE
23
BASIC OPERATIONAL GUIDE
•
If the gate is fully closed an Open Button, Alternate, Radio or Free
Exit input will cause the gate to begin moving in the open direction.
•
If the gate is fully open a Close Button, Alternate, or Radio input
will cause the gate to begin moving in the close direction.
•
If the gate is moving in a Close direction a Close Non-Contact
Sensor or a Close Contact Sensor input will cause the gate to stop,
pause and reverse for approximately 2 inches in the Open direction.
•
If the gate is moving in a Close direction an Open Button, Radio,
Reversing, or Free Exit Loop input will cause the gate to stop, pause
and reverse and run in the Open direction.
•
If the gate is moving in a Close direction a Stop Button or Alternate
input will cause the gate to stop. A subsequent Alternate input will
cause the gate to begin moving in the Open direction.
•
If the gate is moving in an Open direction an Open Non-Contact
Sensor, Open Contact Sensor input or an Open Overload activation
will cause the gate to stop, pause and reverse for approximately 2
inches in the Open direction.
•
If the gate is moving in an Open direction a Stop or Alternate input
will cause the gate to stop. A subsequent Alternate input will cause
the gate to begin moving in the Close direction.
MANUAL OPERATION FEATURE:
The gate can be moved
open or close in case of power failure or other need to move the gate
manually from any position except fully closed without disconnecting the
operator arm. Remove power from the unit (if not already off) and firmly
grasp the leading edge of the gate. Push or pull the gate in the direction
desired. The amount of force required to move the gate will depend on the
setting of the adjustable torque drive, the gate weight, and the inherent
friction of the overall system. Manual Operation is to be attempted only
when the operator is not moving under power.
TO REDUCE THE RISK OF SEVERE INJURY OR DEATH
WARNING!
1. READ AND FOLLOW ALL INSTRUCTIONS AND WARNINGS IN THIS MANUAL.
2. Never let children operate or play with gate controls. Keep the remote control away from children.
3. Always keep people and objects away from the gate. NO ONE SHOULD CROSS THE PATH OF THE MOVING
GATE.
4. Test the gate operator monthly. The gate MUST reverse on contact with a rigid object or stop when an object
activates the non- contact sensor. After adjusting the force or the limit of travel, retest the gate operator. Failure to
adjust and retest the gate operator properly can increase the risk of injury or death.
5. Use the emergency release (if applicable on this operator) only when the gate is not moving.
6. KEEP GATES PROPERLY MAINTAINED. Read the owner's manual. Have a qualified service person make repairs
to
gate
hardware.
7. The entrance is for vehicles only. Pedestrians must use separate entrance.
8. SAVE THESE INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
