45
Rev. 0
APPENDIX B: CAN BASED EVALUATION
• Send RAWRW with COUNTDOWN = 0, WRITE = 0, ADDR = 0, D0 = 16, CAN-Message-Data-Length = 3 to
read
C1, E1, TB1 again and check all data is now zero.
00:00:09:9925 Tx 1 0x117 s 3 00 00 10
00:00:00:0279 Rx 1 0x117 s 6 04 00 00 00 00 00
00:00:00:0004 Rx 1 0x117 s 8 02 00 00 00 00 00 00 00
00:00:00:0004 Rx 1 0x117 s 8 00 00 00 00 00 00 00 00
• See below for the full log file of this example recorded with BUSMASTER
***BUSMASTER Ver 3.2.0***
***PROTOCOL CAN***
***NOTE: PLEASE DO NOT EDIT THIS DOCUMENT***
***[START LOGGING SESSION]***
***START DATE AND TIME 8:5:2017 15:21:16:468***
***HEX***
***RELATIVE MODE***
***START CHANNEL BAUD RATE***
***CHANNEL 1 - PCAN-USB Driver Id 16 - 500000 bps***
***END CHANNEL BAUD RATE***
***START DATABASE FILES***
***… \LTSketchbook\DC\DC2732A_CAN\DC2732A_CAN.dbf***
***END DATABASE FILES***
***<Time><Tx/Rx><Channel><CAN ID><Type><DLC><DataBytes>***
00:00:27:6178 Tx 1 0x11F s 8 86 01 73 74 01 80 0A 01
00:00:01:2543 Rx 1 0x110 s 3 00 00 03
00:00:00:9990 Rx 1 0x110 s 3 00 00 03
00:00:00:9989 Rx 1 0x110 s 3 00 00 03
00:00:00:9979 Rx 1 0x110 s 3 00 00 03
00:00:00:9989 Rx 1 0x110 s 3 00 00 03
00:00:00:9979 Rx 1 0x110 s 3 00 00 03
00:00:00:9990 Rx 1 0x110 s 3 00 00 03
00:00:00:9979 Rx 1 0x110 s 3 00 00 03
00:00:00:9989 Rx 1 0x110 s 3 00 00 03
00:00:00:9989 Rx 1 0x110 s 3 00 00 03
00:00:00:9980 Rx 1 0x110 s 3 00 00 03
00:00:00:9989 Rx 1 0x110 s 3 00 00 03
00:00:00:9979 Rx 1 0x110 s 3 00 00 03
00:00:00:9989 Rx 1 0x110 s 3 00 00 03
00:00:00:9980 Rx 1 0x110 s 3 00 00 03