background image

Specifi

 cations

Limited Warranty

This Linear product is warranted against defects in material 
and workmanship for twenty four (24) months. 

This warranty 

extends only to wholesale customers

 who buy direct from 

Linear or through Linear’s normal distribution channels. 

Linear does not warrant this product to consumers.

 

Consumers should inquire from their selling dealer as to 
the nature of the dealer’s warranty, if any. 

There are no 

obligations or liabilities on the part of Linear LLC for 
consequential damages arising out of or in connection 
with use or performance of this product or other indirect 
damages with respect to loss of property, revenue, or 
profi t, or cost of removal, installation, or reinstallation. 

All implied warranties, including implied warranties for 
merchantability and implied warranties for fi tness, are valid 
only until the warranty expires. 

This Linear LLC Warranty 

is in lieu of all other warranties express or implied.

All products returned for warranty service require a Return 
Product Authorization Number (RPA#). Contact Linear 
Technical Service at 1-800-421-1587 for an RPA# and other 
important details.

USA & Canada (800) 421-1587 & (800) 392-0123

(760) 438-7000 - Toll Free FAX (800) 468-1340

www.linearcorp.com

Copyright © 2009 Linear LLC

227887 A

Am

p

l

i

fi e

d

 Key

pad

s

Continuous Average Output Power, 8 

Ω

 

60 W (2 x 

3

0 W)

(1 kHz sinewave, 2 channels driven 1% THD)

Dynamic Range 

96 db

So

u

rce I

npu

ts

Source Input Impedance 

50 k 

Ω

Source Input Overload 

2.4 Vrms

Sampling Frequency 

48 kHZ

Audio Resolution 

24 Bit Stereo

Em

i

tter O

u

t

pu

ts (1 for e

a

ch so

u

rce 

inpu

t)

Output Drive Current 

12 mA

Output Drive Voltage 

12 VDC

Power S

upp

ly

Input 

120 VAC 60 Hz, 1.2 A Avg.

Output 26 

VDC

Power Consumption Maximum 

200 W

Power Consumption Standby 

20 W

Re

gu

l

a

tory

USA TUV

Canada TUV

Phys

i

c

a

l D

i

me

n

s

i

o

n

s (D x W x L)

ENC-PS 

2.1” x 6.

3

” x 8.5”

ENC-HUB 

1.9” x 6.

3

” x 6.8”

ENC-DRS 

2.6” x 1.8” x 4.1”

ENC-SIWP 

2.9” x 1.

3

” x 4.1”

ENC-LIWP 

2.9” x 1.

3

” x 4.1”

Summary of Contents for 2171-4













Reviews: