6
dc1962cf
DEMO MANUAL DC1962C
Quick start proceDure
Loading a DC1962C Configuration (*.proj) File with the GUI
1. In the upper left hand corner of the GUI, File > Open > browse to your *.proj file. This will load the file into the GUI.
2. Click on the “Go Online”
icon, then click on the “PC
→
RAM”
icon. This loads the configuration
into the working RAM of the devices.
3. To store the configuration to NVM (EEPROM), click on the “RAM
→
NVM” icon as shown below.
Dc1962c Details - top siDe
Figure 3. DC1962C Top Side Details
Summary of Contents for DC1962C
