2
dc2183af
DEMO MANUAL DC2183A
Quick start proceDure
DC2183 is easy to set up to evaluate the performance
of the LTC2107 A/D converter. Refer to Figure 1 for
proper measurement equipment set-up and follow the
procedure below:
Setup
The DC1371 Data Acquisition and Collection System was
supplied with the DC2183 board. Follow the DC1371 Quick
Start Guide to install the required software and for con-
necting the DC1371 to the DC2183 and to a PC.
Figure 1. DC2183 Proper Measurement Equipment Setup
(zoom in for detail)
SINGLE-ENDED
ANALOG INPUT.
ABSORPTIVE FILTER IS REQUIRED
FOR DATA SHEET PERFORMANCE
SINGLE-ENDED ENCODE CLOCK.
USE A LOW-JITTER SIGNAL GENERATOR WITH PROPER FILTERING
JUMPERS SHOWN IN THEIR DEFAULT POSITIONS
THE DC2183 CONNECTS TO THE DC1371 VIA AN FMC CONNECTOR
J1
3.3V
TO 5V
