manualshive.com logo in svg

Linear Acoustic AERO.qc, User Manual

Share
Download
Linear Acoustic AERO.qc User Manual Download Page 9

Linear Acoustic AERO.qc User Guide

5

Chapter 1: Introduction

The Linear Acoustic AERO.qc Audio Quality Controller is an all-in-one unit that com-
bines ITU-R BS.1770 loudness measurement with tools to allow manual or automatic cor-
rection plus extensive monitoring functions that allow the most complete downmix 
emulation available. 

AERO.qc includes metadata functionality where professional audio metadata (i.e. Dolby 
Metadata) can be applied to the unit to minimize processing and control functions such as 
upmixing. 

The unit facilitates the quick creation or ingest of content to a known standard target. 
Loudness and surroundfield are both kept consistent and results are displayed graphically 
so that no interpretation is required better ensuring that all operators will have the same 
high quality result.

The AERO.qc provides the following features:

•

Dual ITU-R BS.1770 loudness meters (fast and slow) with numeric and logical color 
graphic indication of results: green=good

•

True peak indication 

•

Adjustable display of facility loudness target

•

Selectable and adjustable upmixing of Main Input 1/2 (Left/Right front) via industry 
standard 

UP

MAX and UPMAX-II stereo to 5.1 channel upconversion algorithms

•

LtRt or LoRo downmix available full-time

•

Optional monitor section including speaker calibration and downmix emulation

•

Optional redundant power supplies

•

Optional ITU compliant automatic loudness processing for up to six channels of au-
dio; includes input AGC, multiband AGC and limiting, distortion-free look-ahead 
peak limiting, and selectable multiband source noise reduction

•

Optional built-in dual Dolby Digital (AC-3)/Dolby E decoding

•

Optional HD/SD-SDI I/O for embedded audio and VANC metadata

Summary of Contents for AERO.qc































































Reviews:

No comments

Brands by name

Popular brands

Load more brands