39
DO938K
www.domo-elektro.be
EN
PARTS
1.
Temperature control knob
2.
Shelves
3.
Vegetable container
4.
Levelling feet
5.
Door shelves
BEFORE THE FIRST USE
· Remove the exterior and interior packing, wipe the outside thoroughly with a soft dry cloth and the
inside with a wet, lukewarm cloth.
· Select a place with a strong, level floor.
· Allow 13 cm of space between the back of the refrigerator and any adjacent wall.
· Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources nearby will
cause higher electricity consumption.
· Avoid very moist places. Too much moisture in the air will cause frost to from very quickly on the
evaporator, and your refrigerator.
· Before connecting your refrigerator to the power supply, check that the voltage stated on the rating
label of your appliance corresponds to the voltage in your home. A different voltage could damage the
appliance.
· After installation, leave the freezer for 24 hours before turning it on. This way the refrigerant can
settle.
· Allow the appliance to run empty for 8 hours so the compartment can cool to the appropriate
temperature.
· For uneven surfaces, front feet can be aligned.
16
5
2
1
4
3
Summary of Contents for DOMO DO938K
Page 78: ...78 DO938K...
Page 79: ...79 DO938K www domo elektro be...
