25
DO9220IB
www.domo-elektro.be
EN
POSSIBLE PROBLEMS AND THEIR SOLUTIONS
PROBLEM
POSSIBLE SOLUTION
The compressor makes a lot of noise.
· Check that the voltage indicated on the appliance
corresponds to the voltage of the electricity grid in
your home.
Indicator lamp ‘water reservoir empty’
(ADD WATER) lights up.
· Is the water reservoir empty? Fill the water reservoir
with water.
· There’s air in the pump. Restart the appliance with
the on/off button.
There are no indicator lights on.
· There is no power applied to the appliance. Check
the plug is placed in the socket.
· Make sure the fuse is not broken.
The ice is too big and there are bits of
broken ice sticking to it.
· It is possible that ice from a previous cycle has ended
up in the water reservoir. Turn off the appliance and
remove the ice from the water reservoir.
The appliance goes through the cycle, but
no ice comes out.
· The compressor or the ventilation motor is broken.
Contact the after-sales service.
· There is insufficient coolant in the appliance. Contact
the after-sales service.
All indicator lights flash simultaneously.
· The water reservoir is blocked by ice cubes. Pull the
plug out of the socket, remove the ice from the water
reservoir. Plug the power cord back in and press
the on/off button. The appliance will restart after 3
minutes.
The appliance works, but the water gets
warm.
· Contact the after-sales service.
The ice basket is full, but the indicator light
is not lit.
· The sensor is broken. Contact the after-sales service.
The appliance and the air around the
appliance become warm.
· This is normal. The temperature of the compressor
can be up to 90°C.
The operation of the appliance has been
interrupted, for example, by a power
outage or lack of water.
· It takes 3 minutes for the appliance to restart.
