46
DO91122
EN
involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made
by children unless they are older than 16 and supervised.
· Keep the appliance and its cord out of reach of children younger than 16 years.
· Close supervision is necessary when the appliance is used near or by children.
· All repairs should be carried out by the manufacturer or its aftersales service.
· Make sure that children do not touch the cord or appliance.
· Your appliance uses isobutane (R600a) as a refrigerant. Despite the fact that R600a is an
environmentally friendly and natural gas, it is highly flammable. Therefore you should be careful
during shipment and installation to prevent your appliance’s cooler elements from being damaged.
In the event of a leak caused by damage to the cooler elements, move your fridge from open flame or
heat sources and ventilate the room where the appliance is located for a few minutes.
I
ELECTRICAL WARNINGS
· Attention: This appliance cannot be used with an external timer or a separate remote control.
· Before use, check if the voltage stated on the appliance corresponds with the voltage of the power net
at your home.
· The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with
all local standards and requirements.
· Do not let the cord hang on a hot surface or on the edge of a table or counter top.
· Never use the appliance when the cord or plug is damaged, after malfunction or when the appliance
itself is damaged. In that case, take the appliance to the nearest qualified service center for check-up
and repair.
· If the socket is loose, do not plug in the appliance (risk of electric shock or fire).
· It is dangerous to alter or modify the device and its specifications.
· When disposing of the appliance, remove the plug from the power socket, cut the power cord (as
closely as possible to the appliance), and remove the door to prevent playing children getting an
electrical shock or shutting themselves in the appliance.
· The lamp in the appliance is intended for use in this cooling device only. Do not use the lamp as a
household light.
· Unplug the appliance when it is not in use, before assembling or disassembling any parts and before
cleaning the appliance. Put all buttons and knobs into the ‘off’ position and unplug the appliance by
grasping the plug. Never unplug by pulling the cord.
I
INSTALLATION
· Never place this appliance near a gas stove or electrical stove or in a place where it may come into
contact with a warm appliance.
· Always use the appliance on a steady, dry and level surface.
· Keep the cord away from sharp edges and hot parts or other heat sources.
· Keep the ventilation openings free of obstructions.
· The appliance may not be used with an extension lead or a multiple socket.
· Avoid long exposure to direct sunlight.
· Make sure that you have access to the plug of the appliance.
· Make sure that the plug does not get squashed or damaged by the back of the appliance. A squashed
or damaged power plug may overheat and cause fire.
· This is a heavy appliance. Be careful when moving it.
· This cooling unit is not intended for use as a built-in appliance.
· Do not place a power strip or other portable power supply behind the appliance.
· After installation, it is advisable to wait at least four hours before connecting the appliance to allow
the oil to flow back in the compressor.
