DO7038
28
• Always remove the plug from the socket when the battery is charged.
• Clean the shaver regularly and handle it carefully to guarantee an optimal life
cycle.
CHARGING
1. Make sure that the shaver is switched off.
2. To charge, connect the USB cable to the shaver and
plug it into a laptop/computer or into the adapter to
charge the shaver directly via a power outlet.
3. During charging the red indicator light will light up
to indicate that the shaver is charging.
4. When charging the shaver for the first time, make sure to charge it completely to
obtain the maximum battery capacity. This takes at least 8 hours. Afterwards, use
the shaver until the battery is completely empty, and then charge it completely
again.
5. To prolong the life cycle of the battery, repeat this process about twice a year.
6. With a fully charged battery you can use your shaver for at least 35 minutes.
USE
This shaver is intended to be used for shaving facial hair.
1. Remove the USB cable and the protection cap before shaving.
2. Check the foil for any damaging. Do not use the shaver if the foil is damaged.
3. Press the on/off button to switch on the shaver.
4. Make sure that the face is dry.
5. Slightly press the shaver against the face and move to shave.
6. Clean the shaver after use and place the protection cap onto the shaving cap with
foil.
CLEANING
• Open and remove the shaving cap by pressing the 2
unlock buttons at the sides of the shaver.
• Remove the hairs in the appliance with the cleaning
brush.
• The blade assembly is removable and can be
rinsed under running water. Be careful, the blades
Summary of Contents for DOMO DO7038
Page 39: ......
