Linea 2000 DOMO DO239S, Instruction Booklet

Page: 28 / 60

28
DO239S
EN
· For the best results, clean the dust reservoir and the filters after each use. This is better for the suction
power and the life span of the machine.
· While vacuuming, warm air will come out of the motor compartment. This is normal.
CLEANING AND MAINTENANCE
CLEANING THE MACHINE
Clean the machine with a slightly moist soft cloth. Dry the machine off well. Never submerge the machine
in water!
CLEANING THE DUST RESERVOIR
1. Never exceed the maximum indicator on the dust container. For the best results, clean the dust
reservoir and the filters after each use. This is better for the suction power and the life
span of the machine.
2. Press the dust container release to release the dust container from the appliance.
3. Pull the filters out of the dirt receptacle (C). Empty the canister.
4. Remove the HEPA filter (A) from the coarse debris filter (B). Pay attention to the lock
symbol.
A. HEPA filter: this round dust filter captures the small dust particles.
B. Coarse debris filter: this ensures that the large dust particles remain in the dirt
receptacle.
C. Dirt receptacle: this is where all large dirt particles are collected.
5. You can now clean all the parts separately. We recommend you do this with compressed
air. If you do not have compressed air, you can wash out the parts. Make sure they are
completely dry before using them again.
6. Replace the HEPA filter in the coarse debris filter. Pay attention to the lock symbol.
7. Put the filters back in the dirt receptacle.
8. Click the dust container back onto the motor part.
2
3
4
We advise replacing the filters regularly to ensure an optimal operation of the machine. Dirty filters will
reduce the suction power drastically. For the best results, clean the dust reservoir and the filters after
each use. This is better for the suction power and the life span of the machine.
C
A
B