Rear panel
1
2
3
Signal input: Inputs (RCA or XLR) are for connecting a preamplifier to your amplifier. It is designed to receive an
analog
signal (as opposed to
digital
signal). To connect your source we are using a traditional
RCA
cable, they are
usually identified by a color code
RED
to the RIGHT channel and
WHITE
to the LEFT channel.
Speaker output: Connect speaker to the terminals.
Important Note
: Check the impedance of your speakers. When using a pair of speakers, you can use speakers
with an impedance of between 4, 8 and 16 ohms. BE SURE TO USE THE MATCHING TERMINALS.
Power Socket with main fuse: Main fuse is located on the rear of the amplifier just below the power cord socket.
Replace with the same type and value fuse. Once all connections to the amplifier have been made, connect the
power cable to an electrical outlet and turn on the unit as it is ready for operation.
1
2
3
0 Ω
4 Ω
8 Ω
16 Ω
SELECTOR
~220V 50Hz 45W
T5AL250V
LM-503 PA
8
