Safety instructions
We invite you to read the instructions on the proper use of your product carefully. They will ensure the proper functioning
of the latter and it safely.
.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Do not use this device in a wet area, near water, do not expose to rain or moisture.
Do not place any objects filled with liquids such as vases or some others on the top or around.
Do not move the product if it has just been used or if it is still hot.
Do not install near heat sources.To avoid being overheated please keep the unit’s ventilation open.
Never cover the ventilation of the unit.
Amplifier should install steadily and make sure all four feet are on the same level.
Keep the amplifier in 15 cm’s distance to the surrounding walls.
Temperature will become higher after working in long period of time and please keep the unit’s ventilation open and
install the amplifier at a well-ventilated place to avoid troubles and fire hazard.
Clean only with a dry cloth. As a precaution, it is best to unplug the unit before handling and ensure the heat generated
by the product has been properly dissipated.
Please move the amplifier carefully not to drop the unit or be subject to other strong shocks.
Unplug the power cord if you are not going to use the product for an extended period of time or during lightning storms.
Take great care of electrical connections (power cord and plugs). In particular, do not walk on, or press the power cord,
specifically at plugs, power plant and the output of the power supply.
Be sure to use an appropriate power supply to the power jack on the unit outlet. Especially if the device is equipped
with a ground plug, it is necessary to use it.
Forbidden to operate when the output is open or shorted.
Do not attempt to service this product yourself. Opening the cover may expose you to dangerous voltage or other
hazards.
Use only spare parts and accessories recommended by Line Magnetic.
We are not responsible for any problems caused by checking and opening without permission of our company. For
service, please contact a local dealer or qualified service technician.
Power output: 24W
Working conditions:
Temperature: 0°C to 40°C
Moisture: 20% to 80%
Frequency response (±1,5dB): 15Hz-35KHz
Storage conditions:
Temperature: -20°C to 70°C
Moisture: 20% to 90%
Input sensitivity: 1000mV
THD: 1%
S/N ratio: 87dB
Dimensions (W x H x D): 287 x 279 x 574 mm
Input impedance: 100kΩ
Output impedance: 4Ω, 8Ω, 16Ω
Tubes: 1x 310A, 1x 300B, 1x 845, 1x 5U3C
Net weight: 32kg
Power requirements: 230V ±5% (50Hz)
Power consumption: 290W
4
