English Manual
Auto-Scan-Mode: You may select this mode by pressing and
releasing in succession the LEFT SHIFT and RIGHT SHIFT key.When
in Auto-Scan-Mode, press LEFT SHIFT for PC 1 and RIGHT SHIFT for
PC 2. To exit from the Auto-Scan-Mode press the SPACEBAR .
LED DISPLAY MEANING
LED Status
Meaning
ON
This port is selected
OFF
This port is not selected
Flashing equally
Scan mode is active and this port is now
displayed
Flashing: ON long, OFF short Last/Next mode is active and this port is
now displayed
TECHNICAL DATA
Power Consumption 5V DV, 20 mA max. via PS/2 connectors of the
attached computers
Operating Temperature around 5°C ... 40°C
Weight approximately 200g
TROUBLESHOOTING
If you are experiencing problems, first ensure that all cables are
properly connected.
After initial power up port A is active by default. When the PC is
connected to this port and it is not switched on or is in sleep mode the
monitor will not show any signal. Please note that this is not a sign of a
faulty CPU Switch!
Please also note that the LINDY CPU Switch LITE will not respond to
keyboard and mouse commands in Auto-Scan or Last/Next mode.
Pressing the spacebar can only terminate this mode. All other
keyboard and mouse inputs will be ignored.
If this does not solve your problems please follow the steps on the
following two pages.
