Lindy 73194, Manual

Page: 5 / 40

4
Charging
Charging the LE400W
The LE400W can be easily charged by enclosing inside the charging case, ensuring the charging points
meet those of the case.
The case has in-built magnets to secure the earphones in place to avoid any hassle positioning the
LE400W.
§ To begin charging, simply place the earbuds into the charging case and close the charging case.
§ Please note the LE400W will automatically disconnect from the source device once the case is
closed.
§
Each earphone can be independently charged on its own if required. Once both earphones are fully
charged, the charging case will switch off to save power.
§ The LE400W can be charged up to 3 times from a 100% charging case.
§ The LE400W will intermittently beep when they are near low charge. Battery life can also be
monitored with compatible audio source devices.
Charging the Case
To charge the LE400W, the case must also be charged.
This can be done by connecting the USB Type C cable and connecting to a USB power source.
LED Indicators on Charging Case
§ Left LED: This will illuminate white to indicate the left earbud is charging. This LED will turn off once
the earphone is fully charged.
§
Right LED: This will illuminate white to indicate the right earbud is charging. This LED will turn off
once the earphone is fully charged.
§ Centre LED: This LED will indicate the status of the case.
§ If the LED is flashing green, this indicates that the charging case is at 100% charge and can