67
HEY THERE!
JUST CHARGE IT
WE’RE HERE TO HELP. CONTACT US!
HX-HP910
USER GUIDE AND
WARRANTY INFORMATION
You’ve got questions? We’ve got answers.
Contact a Consumer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-HP910)
Register your headphones! Information about where
you bought them and how you’re using them is like
gold for the people who make these headphones.
To register, visit:
USA:
www.jamaudio.com/customer-support/product-registration
CAN:
canada.jamaudio.com/product-registration
Charging the headphones is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge
them using your computer or a wall outlet. The Transit Touch needs about 3 hours for up to 12 hours of party time.
The LED light on your headphones lets
you know what they’re doing.
1. The cord that came with the headphones —
the one with the USB on one end and the micro
USB on the other — will work with your
computer.
2. If you want to use the wall outlet, you’ll need
to pick up a power cord with a micro USB the
next time you’re at the store, or use any USB AC
adapter, including the one for your cell phone.
CONTROL YOUR DESTINY ... OR AT LEAST YOUR HEADPHONES
SHED SOME LIGHT
BLUETOOTH
®
CONNECTION — IT’S A SETUP
1. This is the power button. It also lets you know what
your headphones are up to (see chart below for details)
2. The power cord goes here
3. Aux-in port to hook it up old-school
4. Touchpad — swipe or tap to control your headphones
5. Swipe clockwise to crank the music up
6. Swipe counter-clockwise to turn the music down
7. Tap to play, tap again to pause
8. Swipe forward or up to jam on to the next track
9. Swipe back or down to move to the previous track
Like any amazing couple, this one starts with a
connection — one between your device and the
headphones’
Bluetooth
. Here’s how it works:
1. Make sure the smartphone, tablet, or
computer you’re using with the headphones
has
Bluetooth
.
2. Turn on the headphones (press and hold the
power button for 3 seconds) and look for the
little blinking light.
USA
[email protected]
1.888.802.0040
8:30am–7:00pm EST M–F
[email protected]
1.888.225.7378
8:30am–5:00pm EST M–F
CANADA
or
3h
3. Do whatever your device needs you to do on its end.
4. Look for JAM Transit Touch Headphones in your device’s
Bluetooth
list or click YES.
5. Now hit PLAY on your headphones and crank it up — or down if
you’re lame.
The device and
Bluetooth
will find each other every time, as long as
the headphones are set to
Bluetooth
and your device’s
Bluetooth
is,
you know, on.
If you’re connecting to a computer, you may have some extra steps
on that end. You’ll have to get that information from the computer
company.
Depending on your device, you may be prompted to enter a pairing
code. If prompted, enter “0000” as the code.
To disable pairing of an existing device and pair a new device, tap
and hold the touchpad for 6 seconds to activate pairing mode.
Note: If you turn on your Transit Touch Headphones but haven’t
started the party yet, they will automatically power off after 2 minutes
of unpaired inactivity.
Note: Once paired, if you pause the party for 15 minutes or more,
your headphones will automatically power off to preserve battery life.
3s
Thank you for purchasing
the
JAM Transit Touch
.
Check out the sections
below for all the
important information
about your new
headphones.
Pairing Mode
Connected
Powering On
Charging
Ready to Party
Low Battery
Continued on page 2.
AC adapter not included.
2
3
1
4
5
8
6
9
7
