background image

Radio Frequency Energy, Certifications   

 

 

 

 

 

         

 

 

CE Certification 

This  equipment  complies  with  the  requirements  relating  to  electromagnetic  compatibility,  EN 

55024  and  EN55022  class  A  for  ITE,  EN61000-3-2/-3  the  essential  protection  requirement  of 

Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to 

electromagnetic compatibility. 

 

Shielded cables must be used with this equipment to maintain compliance with radio frequency 

energy  emission  regulations  and  ensure  a  suitably  high  level  of  immunity  to  electromagnetic 

disturbances. 

 

FCC Warning 

This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant  to  part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable 

protection against harmful interference in a residential installation.  

 

This  equipment  generates,  uses,  and  can  radiate  radio  frequency  energy  and,  if  not  installed 

and  used  in  accordance  with  the  instructions,  may  cause  harmful  interference  to  radio 

communications. However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or television reception, 

which can be determined by turning the equipment off and on, the user is encouraged to try to 

correct the interference by one or more of the following measures: 

  Reorient or relocate the receiving antenna 

  Increase the separation between the equipment and receiver 

  Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected 

  Consult the dealer or an experienced technician for help 

You are cautioned that changes or modification not expressly approved by the party responsible 

for compliance could void your authority to operate the equipment. 

 

This device complies with part 15 of the FCC Rules. 

Operation is subject to the following two conditions: 

1.  This device may not cause harmful interference, and 

2.  This  device  must  accept  any  interference  received,  including  interference  that  may  cause 

undesired operation. 

Summary of Contents for 42815











Reviews: