User Manual
English
Operation
Switch Front Panel
1. Input Indicator LED: When a input port has been selected, the corresponding LED will illuminate
2. Auto/Source: To select auto switching or manual switching, please hold this for more than 2
seconds. When manual switching is activated, a short press will select the required input port.
3. EDID Status LED: The selected EDID option will illuminate.
The Auto LED indicates the display’s
EDID is being used.
4. EDID Select button: Pressing this button will switch between each of the 4 Audio EDID options:
Auto/2CH/5.1CH/7.1CH
5. ARC Status LED: If ARC is enabled successfully, this LED will illuminate.
6. ARC On/Off: Press to turn the ARC function on or off
Switch Rear Panel
1. HDMI Output Port: Connect with the display using HDMI cable
2. HDMI Input Ports: Connect with the source devices using HDMI cable
3. Audio Output Port: Connect to analogue speakers or amplifier using a 3.5mm audio cable
(not included). For Toslink (Optical) connections, please use the Mini Optical to Optical
adapter included.
4. RS-232 Port: Control the switch using a PC and RS-232 commands, using the included
3.5mm to RS-232 cable. The RS-232 commands are below.
5. IR Receiver Port: Control the switch using the included 3.5mm IR receiver cable and IR
remote
6. 5VDC 1A PSU Port: Connect to the included PSU
Summary of Contents for 38249
Page 2: ......
