User Manual
English
TCP Configuration
For programmer’s familiar with network communication, you can programme your own TCP/IP
application to control the matrix
Note: TCP port is 5000
RS232 and TCP/IP Console Command
Control is based on ASCII code for RS232, Telnet and TCP interfaces. Every command must include a
carriage return (0d) to execute the command. If a new command is received, a prompt should be sent
back.
1. Command List
Once the
connection with the matrix is established, type “help” in the hyper terminal screen and then
press “enter” to show the command list:
Command
Description
help
Display help information
reset
Reset the device
info
Display device information
r
Set the routing status
rs
Display the routing status
save
Save the current setting to preset
load
Load settings from preset
edid
Select input EDID mode
default
Reset to factory default settings
For more information type “/h” or “?” after each command.
2. Command usage description
-
command "r"
r x y:
Set Input x to Output y
r x:
Set all Outputs to Input x
r:
Displays the current route status
r x y1 .. yn:
Set Input x to Output y1, .. , yn
x = [0-1] (0: disable), y = [0-n] (0: all outputs)
Example: r 1 2
Example: r 0
-
command "rs"
rs:
Displays the current route status
rs x:
Displays the Preset x route status
rs x y:
Displays the Preset x Output y route status
x = [0-0] (0: current status)
y = [0-4] (0: all outputs)
Example: rs
Example: rs 0
Summary of Contents for 38162
Page 2: ......
