User Manual
English
Introduction
Thank you for purchasing the 100m Cat.6 HDMI, IR & RS-232 HDBaseT Extender with PoH & Ethernet
Hub. This product has been designed to provide trouble free, reliable operation. It benefits from both a
LINDY 2-year warranty and free lifetime technical support. To ensure correct use, please read this manual
carefully and retain it for future reference.
The Lindy 100m Cat.6 HDMI, IR & RS-232 HDBaseT Extender with PoH & Ethernet Hub is an end to end,
premium solution for extending HDMI signals over long distances via Cat.6 network cable, while also
providing an integrated 3 port Ethernet hub in either unit.
HDBaseT is a globally recognised standard for high quality distribution of AV content and other
technologies, including power and control, over longer distances via low cost Cat.6 or above cable.
HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
Please Note
: The quoted lengths and resolutions are possible with a direct connection between
Transmitter and Receiver using good quality Cat.6 solid core cable. Using a different cable type, or
introducing wall plates, couplers or patch panels may result in a reduction of possible distances.
Package Contents
▪
HDBaseT HDMI Extender, Transmitter
▪
HDBaseT HDMI Extender, Receiver
▪
IR Emitter Cable, 2m
▪
IR Receiver Cable, 2m
▪
24VDC 1.25A Multi-country Power Supply (UK, EU, US & AUS), Barrel Size: 5.5/2.1mm Screw Type
DC Jack
▪
Lindy Manual
Features
▪
Supports resolutions up to 3840x2160@60Hz 4:2:0 8bit
▪
Audio Pass-through of all HDMI audio formats
▪
PoH
(Power over HDBaseT) support, requiring only a power supply connection at the transmitter side
of the installation
▪
HDMI loop out port at the transmitter unit for local monitoring and viewing*
▪
Supports 10/100 Base-T Ethernet via the HDBaseT connection (2 x 3 Port 10/100 Ethernet)
▪
Supports hardware RS-232 link function and Infrared remote signal transmission
▪
Screw Type DC Jack for a secure power connection
* Please Note: The local HDMI output of the Transmitter may not be used at the same time as the HDBaseT
connection