User Manual
English
Introduction
Thank you for purchasing from the LINDY HDMI Extender series. This HDMI Extender series
allows you to distribute multiple displays over long distances for applications such as digital
signage, public display and large scale presentations. With support for crystal-clear digital
video, including 3D video, these extenders can take your distribution system to the next level.
This range of products can easily be combined and cascaded to suit almost every application
through the use of inexpensive Cat.6 cable; providing a simple to install, cost effective solution
whether you are distributing or simply extending a HDMI signal.
Features
HDMI signal extension through high quality shielded Cat.6 cable
– using unshielded
Cat.6 cable results in shorter distances by approximately 10m per segment
Cat.6 cable implementation to minimize use of high-cost HDMI cable
Ability to cascade up to 4 levels
HDMI 1.3 compliant, 1080p60 and 3D capable with HDCP support
Supports digital video formats in Deep Colour Mode at up to 36 bits (12bits/colour)
Support for LPCM 7.1 and lossless compressed (Dolby TrueHD, Dolby Digital Plus &
DTS-HD Master Audio) Digital audio
Pure hardware solution
Typical Cat.6 cable lengths @ 8bit/colour:
No.
Function
PC 1080p
Player 2D 1080p
Player 3D 1080p
38111
1:8 Splitter
40m
40m
40m
38110
Transmitter TX
30m
30m
20m
38109
Extender EX
40m
40m
40m
Package Contents
8 Port Splitter/ Transmitter No.38111 or Transmitter (TX) No.38110 or
Receiver (RX) No.38112 or Extender/Repeater (EX) No.38109
Multi Country Power Supply with 4 adapters for EURO, US, UK, AUS/CN
This manual
Installation
1.
Before connecting any extender equipment please switch off all devices.
2.
Connect the HDMI display to the RX receiver module using HDMI cables.
3.
Connect the RX modules to the EX or TX or 8 port Splitter/Transmitter modules using
appropriate high quality Cat.6 or Cat.6A SFTP cables.
4.
If you are using EX modules please set the selector switch to
CAT6
position if you are
using the RJ45 input port. If you want to use the HDMI input port set the switch to
HDMI
position.
5.
Set the
EDID
selection switch on EX and 8 Port Splitter/Transmitter to 8 Bit or 12 Bit
according to what your HDMI display and source equipment support and to what
distances you want to reach. Please note that 12 Bit setting limits the maximum Cat.6
cable length on output to 15m.