Lindy 35401, User Manual

Page: 3 / 12

User Manual English
Introduction
Thank you for purchasing the LINDY VGA & Audio Cat.5e/6 4 Port Extender. This product has been
designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free
lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future
reference.This extender allows you to transmit VGA video and analogue audio up to a distance of 300m
using high quality Cat.5e/6 solid core cable to 4 remote receivers with monitors/projectors and speakers
connected. An optional skew compensation unit (like LINDY No. 32766) can be used to correct colour
shadows on the display caused by different lengths of RGB signal transmission over the twisted pairs in
the Cat.5e/6 cable.
Package Contents
No. 35401:

VGA & Audio Cat.5e/6 4 ports Extender
–
Transmitter unit

5V DC ~2A Multi Country power supply

User manual
No. 35402:

VGA & Audio Cat. 5e/6 Extender
– single
Receiver unit

5V DC ~1A Multi Country power supply

User manual
Features

Supports display resolutions up to 1920x1200@60Hz or 1600x1200@60hz or 2048x1536@60Hz

Supports output of mono audio signals (left and right stereo channels are combined)

The transmitter unit integrates a 4 ports video splitter to distribute the signal to up to 4 remote receiver
units

Allows video & audio signals to be extended up to a maximum distance of 300m via high quality solid
core Cat.5e/6 cables. A skew compensation unit like LINDY no. 32766 may be required to get the best
image quality especially at very large cable distances.

Gain and Peak adjustment option on the receiver unit No. 35402.

Supports local monitor and speakers out ports on the transmitter unit No.35401
Installation and Operation
Please switch off all the devices involved in the installation before starting to make any connection.
NOTE: All cables listed in the following procedure can be found and bought directly on the LINDY website.
NOTE: Please use short VGA and audio cables (i.e. 1m) to ensure the best results
NOTE: Using additional RJ45 plug/receptacle connections as well as the use of stranded cores patch
cables in the Cat.5e/6 connection will reduce the maximum distance significantly!
For the installation please use the following steps:
1)
Connect the remote displays / projectors and speakers to the receiver units with a standard VGA
(male / male) cable and (if needed) a standard audio cable with 3.5mm Stereo jack connectors.
2)
Connect the RJ45 connectors of the Cat.5e/6 cables to all the receiver units to be installed
3)
Connect the RJ45 connectors on the other side of the Cat.5e cables to one of the 4 RJ45 ports of
the transmitter unit
4)
Connect the local display / projector and speakers to the OUTPUT ports on transmitter unit using
a standard VGA (male / male) cable and a standard audio cable with 3.5mm Stereo jack
connectors.
5)
Connect the VGA video source and audio source to the related INPUT ports on the transmitter unit
using a standard VGA (male / male) cable and (if needed) a standard audio cable with 3.5mm
Stereo jack connectors.
6)
Connect the Power Supply Units to the DC power ports on both the transmitter and receivers units
and then to the mains power socket.
7)
Switch on all the other devices.