User Manual
English
Introduction
Thank you for purchasing the 2 Port VGA Splitter. This product has been designed to provide trouble free,
reliable operation. It benefits from both a LINDY 2-year warranty and free lifetime technical support. To
ensure correct use, please read this manual carefully and retain it for future reference.
Package Contents
▪
2 Port VGA Splitter
▪
5VDC 1.2A Power Supply, Barrel Size: 5.5/2.1mm
▪
Lindy Manual
Features
▪
Video bandwidth 350 MHZ
▪
Supports resolutions up to 2048x1536
▪
Supports: VGA, S-VGA, XGA, X-VGA, QXGA and Multi-sync
▪
Improves signal quality over cable distances up to 55m
▪
Supports DDC, DDC2, DDC2B (Port 1 only)
▪
Cascadable
▪
Minimalist, metal housing
Installation
Single Splitter Installation:
Use a HD15 Male/Female video extension cable to connect the PC’s video port to the ‘VGA In’ port of
the splitter.
Use HD15 Male/Male video cables to connect the ‘VGA Out’ ports of the video splitter to the monitors;
unless the monitors have pre-installed video cables, in which case you VGA extension cables are
required.
Plug the PSU
into an AC source; and then plug the power adapter cable into the splitter’s DC power
jack.
Power up the splitter, power up the monitors and power up the PC in that order.
Cascading:
To provide video display for more monitors than the number of available ‘VGA Out’ ports on the splitter,
additional splitters can be cascaded. Use a HD15 Male / Female video extension cable to connect an
available ‘VGA Out’ port on the higher-level video splitter to the ‘VGA In’ port of the lower level video
splitter. Theoretically there is no limit to the number of levels in the chain but please be aware that the
signal quality may deteriorate as further units are added further away from the video signal source.
Please Note:
If a DDC type monitor is connected to the
‘VGA Out’ port No. 1, all other monitors must be
able to support the highest resolution that the DDC monitor can provide.
Summary of Contents for 32569
Page 2: ......
