Lindy 32361 Page 63 Manual Download

Page: 63 / 69

LINDY Dual/Quad PRO

Installation and Use

Page 62

Step 4 - Power off the LINDY Dual/Quad PRO

Remove both power supplies from the Dual / Quad PRO.

Step 5 - Power on the LINDY Dual/Quad PRO with the UPGRADE switch ON

Attach the power adapter to the LINDY Dual/Quad PRO whilst the UPGRADE switch

is ON. The green USER display should now show a lower case 'u'. This indicates

that the LINDY Dual/Quad PRO is ready to be upgraded.

The display should now show:

Step 6 - Run the upgrade program

The latest version of the LINDY Dual/Quad PRO firmware is available from the

LINDY Electronics Ltd website at

www.lindy.co.uk

. The upgrade files will be

supplied to you as a group and consist of several files as explained below. These

files should be downloaded to the same directory on your computer.

1) A universal upgrade program

LDQP.EXE

2) Binary code files for each of the processors within the LINDY Dual/Quad PRO

(up to 3)

e.g.

4X16A129.HEX

4X16B129.HEX

4X16C129.HEX

These files use the following naming scheme. The first four characters are the

model type (e.g. 4X16 is a LINDY Dual/Quad PRO 4 with 16 computer ports). The

fifth character is the processor designation. The last three characters represent the

firmware release version (e.g. 129 equals version 1.29).

Summary of Contents for 32361






































































Search results

Summary of Contents for 32361

Reviews:

Related manuals for 32361

Brands by name

Popular brands

Lindy 32361, Manual

Search results

Summary of Contents for 32361

Reviews:

Related manuals for 32361

Brands by name

Popular brands