GS-4
Standard Controls
General Safety Instructions
CAUTION
Lightning Strikes:
Do not attempt to access the system if lightning or thunder have been de-
tected in the area. Wait 30 minutes after the last sighting of lightning or sound of thunder before access-
ing the system.
WARNING
Inspecting the System Prior to Operation:
Always inspect the system before
operation. If the system appears impaired, do not operate the machinery and contact a Lindsay Dealer.
CAUTION
Wear Proper PPE:
Always wear appropriate (NFPA 70E and
OSHA Compliant) Personal Protective Equipment (PPE) for the task
being performed. At a MINIMUM, the following are required equipment:
Ear Protection:
Prolonged exposure to loud noise can cause impairment or loss of hearing.
Wear a suitable hearing protective device such as earmuffs or earplugs to pro-
tect against uncomfortably loud noises.
The A-weighted emission sound pressure level at the pivot point does not ex-
ceed 70 dB.
Eye Protection:
Sharp Objects, debris and explosions can cause severe eye damage or blind-
ness. Wear Safety Standard approved protection that fully shields the eyes.
Additionally, wear a clear plastic face shield that fully surrounds the face from
brow to chin and covers the entire width of the face.
Foot Protection:
Prevent damage from falling or dropped objects on the feet by wearing steel-
toe shoes/boots with metatarsal protection.
Head Protection:
Prevent damage from falling or dropped objects on the head by wearing a Class G Hard Hat for head protection.
Gloves
Prevent electrical shock hazards, cuts and burns to the hands by wearing protective rubber gloves-class 0 with
leather protector and cloth liner.
CAUTION
Proper Work Platform:
Provide a good work/standing platform for personnel to access the
machine. Elevated platforms and ladders must have restraints or railings in place before climbing or
lifting.
CAUTION
Proper Area Lighting:
The owner shall provide area lighting as may be required.
Summary of Contents for GrowSmart Multi-Control
