2035-2 Fisher Dr., Peterborough, ON CANADA K9J 6X6 Ph: (705) 742-1350 or (800) 465-7046 Email: [email protected]
1
|
P a g e
LB-1310TC Series
User Manual
1.0 PRODUCT OVERVIEW & FEATURES
1.1
Description
Lindsay Broadband LB-1310TC series of 1RU rack mount optical transmitters are high linearity,
low noise 1310 nm high performance direct modulated DFB optical transmitters. The LB-
1310TC use high performance DFB direct modulated lasers, with single optical output powers
from 4mw to 20mw, in 2mw steps. RF broadband input (47 – 1000MHz) is directly modulated
into 1310 nm DFB laser via pre-distortion circuit for optimum distortion and noise performance.
Auto output laser power stability control (APC) and auto laser temperature control (ATC) are
standard features. The LCD front panel display is used to monitor all functional transmitter
parameters; output laser power, laser temperature, laser bias current, cooling current, power
supply voltages, MGC/AGC state and OMI value. The LB1310TC is equipped with an RJ45
communication interfaces for system network management. Optional redundant power supply
module is available upon request.
1.2
Features
1RU standard rack mounted case
High performance DFB laser with narrow spectrum and good linearity.
1310 ± 20 nm wavelength
Available Output power (4mw to 20mw in 2mw steps)
47 – 1000MHz RF input with AGC
100 – 260 VAC (50 to 60Hz) powering
APC and ATC control circuits
Built-in Microprocessor monitors laser performance
Front panel LCD display, displays all functioning parameters
