16
Basic Set Up
1.
Disconnect all cables connected to the TV.
2.
Lay the TV down on a flat surface with the back side facing up, and ideally at the edge of a table so that the base of
the TV slightly overhangs on it. Please make sure a soft cushioned material (such as a pillow or thick piece of foam) is
placed beneath the screen.
Installing the Base Stand
To install the TV stand, attach the TV stand to the TV. Align the screw holes, then secure with a screw driver (not included)
using the 4 screws provided.
• The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be
sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact
with it. DO NOT exert pressure on the front of the TV at any time because the screen could crack.
• It is recommended that two people take part in the base installation.
The screw holes will only align if the front of the base stand is at the front of the TV.
Screw x 2
Screw x 2
screw in
screw in
• Please read this instruction manual carefully while setting up your TV.
• If you require additional assistance, please call our customer care center on
1300 530 800
.
