Lincoln Vrtex 360, Operator'S Manual

Page: 24 / 53

B-7
OPERATION
B-7
VRTEX TM 360
Login Screen:
Overview
This page allows the user to:
• Enter Username
• Select Language Preference
• Select Imperial or Metric Units
• Shutdown System
• Continue to the next Setup Screen
1. On Screen Keyboard
The user enters their name by using the joystick and
red select button on the VR weld machine. The joy-
stick allows the user to navigate the keyboard graphic
to highlight letters. Pressing the red select button
enters the letter highlighted into the enter name box
as indicated. The virtual keyboard starts with shift
enabled, so the first letter is automatically capitalized.
The user can select shift or lock (equivalent to caps
lock on a standard keyboard) at any time. If the user
makes a mistake, they can select the back arrow to
delete the last character entered.
LOGIN SCREEN
2. Language
Selecting the yellow language menu button brings up
the list of languages the software supports. Use the
joystick to highlight the desired language.
Press the red select button to accept.
Press the yellow button again to exit the language
menu. The system stores the language selection and
will automatically start up in the same language the
next time.
3. Measurement Units
The blue unit menu button brings up the measurement
system. Use the joystick to highlight the desired unit
of measurement. Press the red select button to
accept. Press the blue again to exit the measurement
unit menu. Selecting
Metric or Imperial converts the
user interface into the corresponding measurement
system. The system stores the measurement selec-
tion, so it will automatically start up in the same unit of
measurement the next time. The system uses the
units shown in
Table B.1 .
4. Menu
The red menu button allows the student to shut down
the system. If the user selects shutdown, a submenu
appears asking the user if they are sure that they want
to shut down the system. This prompt prevents the
user from accidentally shutting down the system. If
the user selects “Yes”, the
VRTEX TM 360
will shut
down.
THIS METHOD SHOULD ALWAYS BE USED TO
SHUT DOWN THE
VRTEX TM 360. Failure to do this
could cause damage to the system.
5. Continue
After
the user enters their name and
all selections
outlines above have been made
, the green
panel button is pressed to continue to set up process.
CAUTION
TABLE B.1