CASE FRONT CONTROLS
(See Figure B.1)
1. USER INTERFACE (optional)
2. STATUS LED -
(See Troubleshooting Section for operational
functions)
3. THERMAL LED -
Indicates when machine has thermal fault.
4. POWER SWITCH -
Controls power to the Power Wave
®
S350.
5. NEGATIVE WELD OUTPUT
6. POSITIVE WELD OUTPUT
7. WORK SENSE LEAD CONNECTOR
8. 12-PIN CONNECTOR (Optional)
DESIGN FEATURES
Loaded with Standard Features
• Multiple process DC output range: 5 - 350 Amps
• 200 – 600 VAC, 1/3 phase, 50-60Hz input power
• New and Improved Line Voltage Compensation holds the
output constant over wide input voltage fluctuations.
• Utilizes next generation microprocessor control, based on the
ArcLink
®
platform.
• State of the art power electronics technology yields superior
welding capability.
• Electronic over current protection
• Input over voltage protection.
• F.A.N. (fan as needed). Cooling fan only runs when needed.
• Thermostatically protected for safety and reliability.
• Ethernet connectivity.
• Panel mounted Status and Thermal LED indicators facilitate
quick and easy troubleshooting.
• Potted PC boards for enhanced ruggedness/reliability.
• Enclosure reinforced with heavy duty aluminum extrusions for
mechanical toughness
• Waveform Control Technology™ for good weld appearance
and low spatter, even when welding nickel alloys.
• Sync Tandem installed.
• Cam-Lock type connectors
B-3
OPERATION
POWER WAVE
®
S350 & S350 ALUMINUM
1
2
3
4
6
5
7
8
FIGURE B.1
