Lincoln LS 2000, Owner'S Manual

Page: 162 / 272

+ and - position operation
These positions allow the driver to
manually select the appropriate
upshift (+) or downshift (-) and
gear range.
•
Can only be entered from the D5
(Overdrive) shift position.
•
Gear ranges 1–5 provide the same
function and ratio as found in the
D5 or D4 automatic mode
positions.
•
The transmission will not upshift
or downshift unless the gearshift
lever is moved forward or
rearward.
•
One tap forward (+) will
command
the transmission to upshift one gear range.
•
One tap rearward (-) will
command
the transmission to downshift one
gear range.
•
Upshifts are allowed at any vehicle speed.
•
2 (Second) gear is normally used for start-up. A 3 (Third) gear
start-up will be allowed only if selected. All other selection(s) will
revert to 2 (Second) gear.
•
If the driver starts in 2 (Second) gear and does not pass a throttle
angle of 60%, the transmission will remain in 2 (Second) gear. No
automatic upshift will occur.
•
If the driver passes the 60% throttle angle, a 2–1 kickdown will occur.
Once the 2–1 kickdown has occurred, the transmission will remain in
1 (First) gear until 2 (Second) gear is manually selected by moving
the gearshift lever. No automatic upshift will occur.
•
Once a 2–1 kickdown has occurred, manually shifting in and out of 1
(First ) gear is allowed until the vehicle comes to a complete stop.
•
A shift to 1 (First) with the vehicle at a stop is never allowed.
•
When downshifting at normal road speeds, the transmission will only
allow a downshift into the
next lower gear.
Driving
162