English
English
6
Technical Specifications
INPUT
Input Power at Rated Output
EMC Class
PC65
5 kW @ 100% Duty Cycle
9 kW @ 35% Duty Cycle
A
Input Voltage
400 V
15%
Three Phase
PC105
8 kW @ 100% Duty Cycle
15 kW @ 35% Duty Cycle
A
Frequency
50/60 Hz
RATED OUTPUT AT 40°C
Duty Cycle
(Based on a 10 min. period)
Output Current
Output Voltage
PC65
100%
60%
35%
40 A
50 A
65 A
96 Vdc
100 Vdc
106 Vdc
PC105
100%
60%
35%
60 A
80 A
105 A
104 Vdc
112 Vdc
122 Vdc
OUTPUT RANGE
Cutting Current Range
Maximum Open Circuit Voltage
Pilot Arc Current
PC65
20 ÷ 65 A
PC65
540 Vdc
PC65
20 A
PC105
20 ÷ 105 A
PC105
540 Vdc
PC105
20 A
COMPRESSED AIR or GAS
Required Inlet Pressure
5.0bar ÷ 7.5bar
RECOMMENDED INPUT CABLE AND FUSE SIZES
Fuse (delayed) or Circuit Breaker (“D” characteristic) Size
Input Power Cable
PC65
25 A
PC65
4 Conductor, 2.5 mm
2
PC105
32 A
PC105
4 Conductor, 4 mm
2
PHYSICAL DIMENSIONS
Height
Width
Length
Weight
PC65
385 mm
PC65
215 mm
PC65
586 mm
PC65
19 kg
PC105
500 mm
PC105
275 mm
PC105
711 mm
PC105
32 kg
Operating Temperature
-10°C ÷ +40°C
Storage Temperature
-25°C ÷ +55°C
WEEE
07/06
English
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE)
and its implementation in accordance with national law, electrical equipment that has reached the end of its
life must be collected separately and returned to an environmentally compatible recycling facility. As the
owner of the equipment, you should get information on approved collection systems from our local
representative.
By applying this European Directive you will protect the environment and human health!
Spare Parts
12/05
Part List reading instructions
Do not use this part list for a machine if its code number is not listed. Contact the Lincoln Electric Service
Department for any code number not listed.
Use the illustration of assembly page and the table below to determine where the part is located for your particular
code machine.
Use only the parts marked "X" in the column under the heading number called for in the assembly page (# indicate
a change in this printing).
First, read the Part List reading instructions above, then refer to the "Spare Part" manual supplied with the machine, that
contains a picture-descriptive part number cross-reference.
Electrical Schematic
Refer to the "Spare Part" manual supplied with the machine.