Lincoln Cobra 501, Owner'S Manual

Page: 13 / 20

6.3A-68002-A01
S
u
b
je
c
t
to
m
o
d
if
ic
a
ti
o
n
s
Page 13 of 20
LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259
Owner’s Manual
Cobra 501
• Before setting the measure X, check the distance 45
between the lubrication head and the cylinder of the
lubrication head.
• Determine horizontal installation position acc. to Fig. 5.
• The COBRA can be positioned via the long holes in the
attaching plates.
• Maximum horizontal roller movement: ± 5 mm
• If the horizontal roller movements are longer than ± 5mm,
the rollers must be guided laterally by an auxiliary
construction at the roller or chain conveyor.
Note : The minimum and maximum distances must also be ad-
hered to by taking into consideration the horizontal roller move-
ment.
Determination of the horizontal installation position:
Fig. 8:- Horizontal installation position
A - Lubrication head X - Normal distance: 20 mm
B - Roller Minimum distance: 10 mm
C - Lubrication nippel Maximum distance: 30 mm
4.2 Electrical installation
• The electrical installation must be
made according to the description of
the whole system and wiring diagram.
All electrical work may be executed
only by qualified personnel.
5. Operating instruction
Observe the following for all work at
the COBRA 501:
• Danger of crush due to possible
carriage movement within the frame
(see Fig. 1, items F - H).
• Danger of impact when the pick-up
arm and the lubrication head (see
Fig. 1, items D and C) extend and
retract, particularly when the chain
sensors SK as well as the sensors SR
and SZ are not activated correctly.
4319a01
Fig. 9: Horizontal installation position
4320a01