Page Number - 4
Form 422589
ASSEMBLY
Assemble reel as follows. Refer to SERVICE PARTS for part
numbers and location.
A. Assemble arbor and ratchet casting (237670) to support
assembly (237656) with four hex head screws (50014)
and four hex nuts (51022).
B. Lubricate V-ring seal (237671) and place on arbor and
ratchet casting (237670) with lip facing away from arbor
ratchet.
C.Assemble power spring assembly (237672) onto arbor
and ratchet casting (237670) until spring canister
bottoms on arbors shoulder.
D. Lubricate V-ring seal (237673) and assemble onto arbor
and ratchet casting (237670) with lip facing toward
spring canister.
E. Assemble axle (242017) to sheave assembly (237680)
with three nuts (51010).
F. Assemble axle and sheave assembly to reel by sliding
axle (242017) through bearings in the arbor and ratchet
casting (237670). Secure with washer (48217) and TRU-
ARC (68424). Shim as required using shims (48385)
between washer (48217) and arbor and ratchet casting
(237670) to eliminate axle end play.
G. Rotate sheave assembly (237680) and align six \
mounting holes with mating holes in power spring
canister (237672). Secure with five carriage bolts
(237738), carriage bolt (237739) and six nuts (51010).
NOTE: The carriage bolt (237739) is assembled in hole
adjacent to pawl pin.
H. Assemble roller outlet arm assembly (237690) on bolts
(50014) and secure using three nuts (51022).
I. Assemble roller outlet assembly (237692) to roller outlet
arm assembly (237690) by snapping into stamped out
contour in roller arm. Make certain that snaplocks are
firmly seated after assembling. Install (50033) hex head
screws through roller outlet. Secure with nut (51304).
J. Assemble swivel assembly (84679) onto axle (242017)
and tighten.
K. Assemble swivel adapter (242015) into axle (242017).
L. Assemble hose clamp (237760) to sheave assembly
(237680) with carriage bolt (237738). Secure with nut
(51010).
M. Assemble latch pawl (237683) to pawl pin on power
spring assembly (237672) and secure with washer
(48327) and TRUARC (66316).
N. Assemble extension spring (237695) to latch pawl
(237683) and carriage bolt (237739). Secure with locknut
(51304).
13162 and 565253 are part of 237672
To order call 1-800-548-1191 or visit www.partdeal.com - [email protected]