the
centralized
lubrication system having a single
line circuit of SL-1, SLS-11, SL-32,
It is an air operated reciprocating
pump that discharges an established
amount of lubricant *(.11 cu. in.) into
*Based on lubricants that are free
of entrapped air. Lubricants that are
aerated will reduce output of pump.
FILL RESERVOIR
Use 81834 Manual Filler Pump to fill reservoir through the filler
fitting in the pump body. Attach coupler on delivery hose to filler.
Stroke filler pump handle until lubricant weepage is noted at air
vent hole in reservoir (lower portion of follower must rise beyond
air vent hole to expel entrapped air from lubricant).
Model No. 83167
AIR OPERATED GREASE PUMP
Series "H"
RATIO
LUBRICANT OUTPUT
(cu. in.)
RESERVOIR AIR
LUBRICANT
LUBRICANT OPERATING PRESSURE (PSI)
PER
CYCLE
PER MIN.
(@100PSI)
CAPACITY INLET
OUTLET
TYPE OF
SYSTEM MINIMUM MAXIMUM
RECOM-
MENDED
40:1
*.11
12
12 LBS.
1/8"
NPTF(F)
3/4"
NPTF(F)
SL-1
SL-11
1,850
3,550
2,500
SL-32
SL-33
1,200
3,550
1,500
TYPICAL
INSTALLATION
The 83167 Pump is used as
pumping unit for a
OR SL-33 Injectors.
the circuit for each pump cycle.
NOTE:Whenfillingthereservoir,cautionshouldbeusedasextreme
pressure can cause damage to reservoir and follower assembly.
Section
- C8
One Lincoln Way
Copyright 2005
St. Louis, Missouri 63120-1578
Printed in U.S.A.
Page
- 85T
(314) 679-4200
JULY - 2005
FORM 403574
