When the engine is cold, check the
level of the engine coolant in the
reservoir.
•
The engine coolant should be at the “FULL COLD” level or within the
“COLD FILL RANGE” as listed on the engine coolant reservoir
(depending upon application).
•
Refer to
scheduled maintenance information
for service interval
schedules.
•
Be sure to read and understand
Precautions when servicing your
vehicle
in this chapter.
If the engine coolant has not been checked at the recommended interval,
the engine coolant reservoir may become low or empty. If the reservoir is
low or empty, add engine coolant to the reservoir. Refer to
Adding
engine coolant
in this chapter.
Note:
Automotive fluids are not interchangeable; do not use engine
coolant, antifreeze or windshield washer fluid outside of its specified
function and vehicle location.
Adding engine coolant
When adding coolant, make sure it is a 50/50 mixture of engine coolant
and distilled water.
When the engine is cool,
add the mixture to the
coolant reservoir until the appropriate fill level is obtained.
WARNING:
Do not add engine coolant when the engine is hot.
Steam and scalding liquids released from a hot cooling system
can burn you badly. Also, you can be burned if you spill coolant on hot
engine parts.
WARNING:
Do not put engine coolant in the windshield washer
fluid container. If sprayed on the windshield, engine coolant
could make it difficult to see through the windshield.
2009 Navigator
(nav)
Owners Guide, 2nd Printing
USA
(fus)
Maintenance and Specifications
340
