Lincoln 2005 Town Car Owner'S Manual Download Page 117 | Manualshive

Page: 117 / 329

background image

To prolong the life of the wiper blades, it is highly recommended to
scrape off the ice on the windshield before turning on the wipers. The
layer of ice has many sharp edges and can damage the micro edge of the
wiper rubber element.

TILT STEERING WHEEL

To adjust the steering wheel:

1. Pull and hold the steering wheel
release control toward you.

2. Move the steering wheel up or
down until you find the desired
location.

3. Release the steering wheel
release control. This will lock the
steering wheel in position.

Never adjust the steering wheel when the vehicle is moving.

ILLUMINATED VISOR MIRROR (IF EQUIPPED)

Lift the mirror cover to turn on the
visor mirror lamp.

2005 Town Car

(tow)

Owners Guide (post-2002-fmt)
USA_English

(fus)

Driver Controls

116

«
...
115
116
117
118
119
...
»

Summary of Contents for 2005 Town Car










































































































































































































































































































































Reviews:

No comments

Related manuals for 2005 Town Car

Brand: Valeo Pages: 17

Brand: CAMPARK Pages: 20

Brand: Jeep Pages: 25

Brand: Jeep Pages: 51

Brand: Farenheit Pages: 8

Brand: Aries Pages: 3

Brand: Ford Pages: 38

Brand: Edelbrock Pages: 1

Brand: FORM FIT Pages: 2

Brand: Gator Pages: 8

Brand: Nav TV Pages: 3

Brand: Toyota Pages: 636

Brand: Yakima Pages: 9

Brand: Daesung Pages: 9

Brand: Pontiac Pages: 318

Brand: v.link Pages: 21

Brand: Skoda Pages: 2

CF-UFORCE-DRW01

Brand: FALCON RIDGE Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands