manualshive.com logo in svg

Lincoln 2005 Navigator, Owner'S Manual

The Lincoln 2005 Navigator Owner's Manual is a comprehensive guide for all owners of this iconic vehicle. Easily accessible, you can download this manual for free from our website, ensuring that you have essential information at your fingertips. Stay informed about your Navigator's features, maintenance, and operation effortlessly.

Share
Download
background image

Use the following guidelines to avoid static build-up when filling an
ungrounded fuel container:

•

Place approved fuel container on the ground.

•

DO NOT fill a fuel container while it is in the vehicle (including the
cargo area).

•

Keep the fuel pump nozzle in contact with the fuel container while
filling.

•

DO NOT use a device that would hold the fuel pump handle in the fill
position.

Fuel Filler Cap

Your fuel tank filler cap has an indexed design with a 1/4 turn on/off
feature.

When fueling your vehicle:

1. Turn the engine off.

2. Carefully turn the filler cap counterclockwise 1/4 turn of a turn until it
stops.

3. Pull to remove the cap from the fuel filler pipe.

4. To install the cap, align the tabs on the cap with the notches on the
filler pipe.

5. Turn the filler cap clockwise 1/4 turn of a turn until at least one click
is heard.

“CHECK/TIGHTEN FUEL CAP” will display in the message center when
the fuel filler cap is not properly installed. Proper fuel filler cap
installation is checked automatically as the vehicle is driven, but not until
after some fuel is used (fuel gauge drops below full). Once the fuel filler
cap is properly secured, “CHECK/TIGHTEN FUEL CAP” will turn off
after a short period of driving.

If you must replace the fuel filler cap, replace it with a fuel filler
cap that is designed for your vehicle. The customer warranty may
be void for any damage to the fuel tank or fuel system if the
correct genuine Ford or Motorcraft fuel filler cap is not used.

The fuel system may be under pressure. If the fuel filler cap is
venting vapor or if you hear a hissing sound, wait until it stops

before completely removing the fuel filler cap. Otherwise, fuel may
spray out and injure you or others.

REVIEW COPY

2005 Navigator

(nav)

, Owners Guide (post-2002-fmt)

(own2002)

,

Market:

USA_English

(fus)

Maintenance and Specifications

371

Summary of Contents for 2005 Navigator

















































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2005 Navigator

GARO ENTITY PRO Installation preview
ENTITY PRO
Brand: GARO Pages: 2
CITROEN C8 NaviDrive Manual preview
C8 NaviDrive
Brand: CITROEN Pages: 52
Chariot Carriers 51100913 Instruction Manual preview
51100913
Brand: Chariot Carriers Pages: 3
Havis-Shields 1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28 Install Instructions preview
1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28
Brand: Havis-Shields Pages: 3
BURY CC 9040 Specification preview
CC 9040
Brand: BURY Pages: 2
Baja Designs 447575 Instructions preview
447575
Brand: Baja Designs Pages: 5
Metra Electronics 99-7860 Installation Instructions preview
99-7860
Brand: Metra Electronics Pages: 5
Renkforce RF-4743771 Operating Instructions preview
RF-4743771
Brand: Renkforce Pages: 4
Caltrend LY115 Installation Instructions preview
LY115
Brand: Caltrend Pages: 3
INDIWORK A-LINK2-NTG5 Instruction Manual preview
A-LINK2-NTG5
Brand: INDIWORK Pages: 18
Opel CORSA 2020 Infotainment Manual preview
CORSA 2020
Brand: Opel Pages: 103
Saab 32000574 Installation Instructions Manual preview
32000574
Brand: Saab Pages: 9
Ford 1999 Crown Victoria Owner'S Manual preview
1999 Crown Victoria
Brand: Ford Pages: 208
WABCO TEBS E Manual preview
TEBS E
Brand: WABCO Pages: 224
Edelbrock PRO-FLO XT 3527 User Manual preview
PRO-FLO XT 3527
Brand: Edelbrock Pages: 39
KAP HK CARPLAY 10w Instruction Manual preview
HK CARPLAY 10w
Brand: KAP Pages: 22
Honda 2002 Accord Coupe Owner'S Manual preview
2002 Accord Coupe
Brand: Honda Pages: 367
BabySafe Beagle User Manual preview
Beagle
Brand: BabySafe Pages: 43

Brands by name

Popular brands

Load more brands