Lincoln 2005 Navigator Owner'S Manual Download Page 276

Page: 276 / 400

GVW (Gross Vehicle Weight)

– is the Vehicle Curb cargo +

passengers.

GVWR (Gross Vehicle Weight
Rating)

– is the maximum

allowable weight of the fully loaded
vehicle (including all options,
equipment, passengers and cargo).

The GVWR is shown on the
Safety Compliance Certification
Label located on the driver’s
door or B-Pillar. The GVW must
never exceed the GVWR.

Exceeding the Safety Certification Label vehicle weight rating
limits could result in substandard vehicle handling or

performance, engine, transmission and/or structural damage, serious
damage to the vehicle, loss of control and personal injury.

REVIEW COPY

2005 Navigator

(nav)

, Owners Guide (post-2002-fmt)

(own2002)

Market:

USA_English

(fus)

Tires, Wheels and Loading

276

Summary of Contents for 2005 Navigator

















































































































































































































































































































































































































Search results

Summary of Contents for 2005 Navigator

Reviews:

Related manuals for 2005 Navigator

Brands by name

Popular brands

Lincoln 2005 Navigator, Owner'S Manual

Search results

Summary of Contents for 2005 Navigator

Reviews:

Related manuals for 2005 Navigator

Brands by name

Popular brands