8. Maintenance
Attention:
before any maintenance operation, it is necessary to disconnect the machine from
the power.
8.1. Routine maintenance
• Check the degree of wear of the components of the device and the need the change; Only use
OEM spare parts and accessories.
• Check the condition of all electrical components to ensure their functioning properly.
At the end of each use, clean the machine thoroughly:
• Remove the pad/brush (18/24/ 19) to avoid that, by evaporating, the electrolytic solution
becomes encrusted on the torch insert (17/23). When the buffer/brush (18/24/19) is worn or
if it shows traces of burns, replace with a new one. If the buffer/brush (18/24/ 19) is still
usable, rinse under water.
• Once cold, clean the insert (17/23) under the water to prevent the formation of deposits.
Attention:
Lincoln Electric Europe assumes no responsibility for the use of unauthorized parts.
8.2. Extraordinary maintenance
Extraordinary maintenance shall in principle be entrusted to Lincoln Electric Europe qualified
technicians or authorized service centers.
Attention:
Any warranty offered by Lincoln Electric Europe shall be voided if the machine is
disassembled, repaired or modified by unauthorized personnel or service center.
9. Elimination and Disposal
Caution:
It is crucial to ensure the protection of the environment.
PACKAGING:
the packaging is considered urban waste and may be disposed of as such (first
class dumps) with no risk to humans or the environment.
WORN PADS:
worn pads are special waste for disposal, in compliance with the standards
existing in your country.
MACHINERY AND OBSOLETE EQUIPMENT:
Machinery and obsolete equipment are hazardous waste to be disposed by taking
into account the category to which they belong. Under Directive EC 2002/96 for
electrical and electronic equipment (WEEE), during disposal of these, the user has to
sort the electrical and electronic components and deliver them to an authorized
collection center or return the equipment to the seller against the purchase of new equipment.
USED LIQUID SOLUTIONS:
during the treatment process (stripping and polishing), liquid solution
is used on heavy metals: spent fluids must be considered special waste for disposal in
accordance with the regulations in force in the country where the machine is used.
Ordering guide
Options
Description
Diagram label
Quantity
Reference Num.
Machine OPTICLEAN II including:
A
1
W000382322
Torch assembly
12
1
W000275260
Ground cable
9
1
W000375139
Torch power cable
10
1
W000375141
Torch support
13
1
W000382323
Torch support extension
14
1
W000382325
Allen Wrench
-
1
W000382326
Standard insert
17A
1
W000382571
Standard tip
18A
10
W000272348
Narrow insert
17B
1
W000382572
Narrow tip
18B
10
W000272351
Carbon-fiber brush
19
1
W000382329
Solution "Neutral Bomar" 100 ml
11A
20
W000272038
Solution "Brill Bomar" 100 ml
11B
20
W000272347
Neutralizer-solution Clean-Inox-L
20
6
W000274842
Labeling kit:
B
1
W000271936
Black marking solution
26
1
W000272041
White marking solution
27
1
W000382573
Marking support
23A
1
W000272039
Marking pen
24A
20
W000272040
Description
Quantity
Reference
Pad holder
1
On request
Pad
1
On request
Pad holder
1
On request
Pad
1
On request
Pad holder
1
W000382327
Pad
1
W000382238
OPTICLEAN II
Welds cleaning equipment
EN
www.weldline.eu
Lincoln Electric Europe S.L. c/o, Balmes, 89 - 8º 2ª, 08008 Barcelona, SPAIN
ISUM OPTICLEAN II-EN__ 16/03/2018 09:22 Page4