Lincoln Electric Weld Booth, Operator'S Manual

Page: 19 / 24

A-13
INSTALLATION WELD BOOTH
curtain BreakDoWn anD assemBly
4 ft Booth Weld Curtain (L15788-45) components:
• 50” Mounting Bracket (Qty 1 pc)
• 66” Curtain Strip (Qty 8 pcs - Comes in roll with pre-punched
holes)
• 12” Clamping Strip (Qty 3 pcs)
• 8” Clamping Strip (Qty 1 pc)
• 6” Clamping Strip (Qty 1 pc)
• Keps ® Nuts (Qty 25 pcs)
Note: Self-tapping screws are part of AD1319-13 KIT
5 ft Booth Weld Curtain (L15788-8) components:
• 62” Universal Mounting Bracket (Qty 1 pc)
• 66” Curtain Strip (Qty 10 pcs - Comes in roll with pre-
punched holes)
• 12” Clamping Strip (Qty 4 pcs)
• 8” Clamping Strip (Qty 1 pc)
• 6” Clamping Strip (Qty 1 pc)
• Keps ® Nuts (Qty 31 pcs)
Note: Self-tapping screws are part of AD1319-13 KIT
6 ft Booth Weld Curtain (L15788-9) components:
• 74” Universal Mounting Bracket (Qty 1 pc)
• 66” Curtain Strip (Qty 12 pcs - Comes in roll with pre-
punched holes)
• 12” Clamping Strip (Qty 5 pcs)
• 8” Clamping Strip (Qty 1 pc)
• 6” Clamping Strip (Qty 1 pc)
• Keps
®
Nuts (Qty 37 pcs)
Note: Self-tapping screws are part of AD1319-15 Hardware Kit
Step 1. Position Universal Mounting bracket 1” off of the edge of
the Weld Booth tubing per picture below. Drill holes on the
post and use No. 12 self-tapping screws to assemble bracket.
See Fig. A.21
FIG. A.21
Note: ½” hole that exist on the top of the post can’t be used to assemble cur-
tain. That hole is used for header tube assembly
Step 2. Curtains come as a roll. There are multiple strips of
curtain per roll. Curtains have perforations at which the
curtain is to be separated into strips.
Step 3. Assemble curtain strips to the universal mounting bracket
by adding clamping strip and securing them with Keps®
nuts. Overlap curtain strips 2”. See Fig. A.22
FIG. A.22
1” from edge of
tubing to end of
Mounting Bracket
Self-tapping
screw
Existing 1/2” hole
cannot be used
Overlap curtain
strips 2”
Clamping
Strip
Keps ®
Nut
Curtain Strip