SAE-400 Severe Duty
www.lincolnelectric.com
[3]
A CLOSER LOOK
• Most fasteners are stainless steel. Assembled with anti-seize
compound.
• Perkins 4-cylinder, water-cooled industrial diesel engine offers low
maintenance and long life. Water separator on engine to filter
water from diesel fuel.
• Automatic shutdown protection for low oil pressure or high
coolant temperature.
• Two 12 volt batteries paralleled for 1130 cold cranking amps of
engine starting.
• Printed circuit board for idler and engine protection is potted to
provide a robust environmental shield.
• Manufactured under a quality system certified to ISO 9001
requirements and ISO 14001 environmental standards.
• Approved by the Canadian Standards Association (CSA).
• Three-year Lincoln warranty. (Engine is warranted separately
by the manufacturer.)
QUALITY AND RELIABILITY
Assembled on a heavy gauge galvanized steel frame. Designed for
durability on the job site. Rugged construction withstands rough field
handling, protecting internal parts.
Stainless steel roof, doors, control panel and
remote control box.
Hot-dip galvanized base, radiator shroud
and internal steel components.
Lexan™ nameplates - printing will
not wash out from salt spray.
Weather protective covers
on all receptacles.
Generator, armature and exciter
lamination stacks are dipped in
E-Coat for a tough, completely
bonded coating.
Radiator - phenolic (plastic) dip-
coated for corrosion protection.
All copper coil windings. Improved
coil insulation for
increased durability.
Brushholder assemblies are stainless
steel and non-metallic materials to
avoid corrosion.
All switch and wire connections are coated for
corrosion protection and to prevent electrical
"tracking" between contacts.
Fuel tank coated inside and out with plastisol.
Material does not interact with diesel fuel.
All toggle switches sealed to
protect against moisture.
Designed And Built For The Off-Shore Salt Spray And Other Corrosive Environments
