DC-400
D-1
MAINTENANCE
D-1
Routine Maintenance
1. The fan motor has sealed bearings which require
no service.
2. In extremely dusty locations, dirt may clog the air
channels causing the welder to run hot. Blow out
the machine at regular intervals.
3. In extremely dusty locations, dirt may accumulate
on the remote control terminal strip TS1. Wipe or
blow this terminal strip off at regular intervals. This
is particularly important in damp locations.
ELECTRIC SHOCK
can kill.
•
Have an electrician install and service
this equipment.
•
Turn the input power off at the fuse
box before working on equipment.
•
Do not touch electrically hot parts.
----------------------------------------------------------------------
WARNING
Summary of Contents for RED-D-ARC DC-400
Page 39: ...DC 400 NOTES ...
